PRODUCT NAME
| CCT/LED Colour (K) | |
|---|---|
| CRI | |
| Luminaire Lumens | |
| Optical Data/Beam Angle (°) | |
| LED Binning |
| Watts per metre (W/m) | |
|---|---|
| Input Voltage | |
| Connection Type | |
| Maximum Chain Length (mm) | |
| Approx. Power Consumption (W) | |
| Dimmable | |
| Max Luminaire Length (mm) |
| Finish | |
|---|---|
| Length (mm) | |
| Ambient Storage Temperature (°C) | |
| Ambient Operating Temperature (°C) | |
| IP Rating | |
| IK Rating | |
| LED Pitch (mm) | |
| Cable Exit/Entry | |
| Weight (g) |
"L" = Length
PART NUMBER:
___
___
___
___
___
___
Provided data are typical values. Due to tolerances of the production process, figures for light output, electrical data etc can vary up to 10%. The Tc-point must be measured in thermal equilibrium in accordance with IEC EN 60598-1.
Copyright © Vexica. All rights reserved. For informational purposes only.
Not a warranty or specification. Data subject to change without prior notice.
PRODUCT NAME
| CCT/LED Colour(s) (K) | |
|---|---|
| Minimum CRI | |
| Luminaire Lumens | |
| Optical Data/Beam Angle(s) (°) | |
| LED Binning |
| Power Options (W/m) | |
|---|---|
| Input Voltage | |
| Connection Type | |
| Maximum Chain Length (mm) | |
| Approx. Power Consumption (W) | |
| Dimmable | |
| Max Luminaire Length (mm) |
| Finish | |
|---|---|
| Length Increments of (mm) | |
| Ambient Storage Temperature (°C) | |
| Ambient Operating Temperature (°C) | |
| IP Rating(s) | |
| IK Rating | |
| Number of LED's | |
| Cable Exit/Entry | |
| Weight (g) |
"L" = Length
PART NUMBER:
___
Provided data are typical values. Due to tolerances of the production process, figures for light output, electrical data etc can vary up to 10%. The Tc-point must be measured in thermal equilibrium in accordance with IEC EN 60598-1.
Copyright © Vexica. All rights reserved. For informational purposes only.
Not a warranty or specification. Data subject to change without prior notice.
The VEX-BLADE-RGB is a colour change pixel manufactured from Anodised 6082 Aluminium material. The front lense is an opal finish to allow for even light distribution from the pixel. This pixel contains RGB tri chip leds designed for perfect colour mixing pixel applications. The modules uses a RGB DMX driver system as per the schematic… Read more »
The VEX-43 DL is a fixed LED downlight. It is manufactured from CNC machined aluminium to optimize heat sinking capabilities for unrivalled down light applications. The luminaire is finished in anodised silver , black or finishes to suit the application. Optic options available Low profile design Spring clip fixings Max 4 units per driver wired… Read more »
This VEX-LINEAR-IOBD is a recessed linear LED luminaire available in white led colour temperatures with DMX dimming capabilities. The luminaire uses hyper efficient white LED technology from CREE with a suitable pitch providing a homogenous light output from the light emitting surface for wall grazing applications. Led’s are under run for efficiency and longevity. Robust… Read more »
This VEX-LINEAR-OBD is a linear LED luminaire available in white led colour temperatures with DMX dimming capabilities. The luminaire uses hyper efficient white LED technology from CREE with a suitable pitch providing a homogenous light output from the light emitting surface for wall grazing applications. Led’s are under run for efficiency and longevity. Robust anodised… Read more »
VEX-MIDIPIX provides sparkle white pixel effects for facade lighting projects Individually cabled Rated to IP66 PMMA UV stable lens Aluminium back plate for heatsinking Low power consumption 6500K CCT Download the Product Datasheet here: VEX-MIDIPIX-WHITE
The VEX-Spot-PX6-SQ is a single colour xed at 32 degree from vertical LED spotlight for the FC8 spec. Remote LED driver Download the Product Datasheet here: VEX-SPOT-PX6-SQ
The VEX-SPOT-PIX is an LED direct view luminaire suitable for outdoor applications for architectural and general lighting purposes with a UV stable lens. Offered in surface mount or recessed options for facades. This VEX-SPOT uses a remote PSU driver to power the luminaire with inputs for DMX control. The luminaire is offered in single white… Read more »
The VEX-PIXEL-RGB is a colour change pixel manufactured from 6082 Aluminium material for superior thermal characteristics in high ambient temperatures. This pixel contains RGB or RGBW chip leds designed for pixel applications. The modules uses a low voltage input. This pixel is finished with a hard wearing and environment resistant AA25 anodised finish in either… Read more »
Materials: Anodised Aluminium Finish: Silver and Plastic Diffuser Profile Dimensions: 28 x 21mm Lengths: 104mm to 1504mm Accessories: ABS Fixing Clips Formats: 2000K, 2500K, 2700K, 3000K, 3500K, 4000K, 5000K Lens: Diffused Cable Entry: Rear Exit (IP67 Rated Connector) for End to End Illumination Binning: 3SDCM Download the Product Datasheet here: VEX-H-LINE-INDOOR.pdf
The VEX-Sparkle is a single colour pixel manufactured from CNC machined aluminium material. This pixel contains a single high output CREE LED chip ideal for sparkle pixel applications. The modules uses a remote DMX driver. This pixel is CNC manufactured from high grade anodised aluminium. An ABS fixing sleeve is provided for installation. Facade lighting… Read more »
The VEX-PIXEL-RGBW-DMX is a colour change pixel manufactured from anodised Aluminium material for superior thermal characteristics in high ambient temperatures. This pixel contains 1x RGBW quad chip LED designed for pixel applications. The modules uses a RGBW DMX low voltage input. This pixel is finished with a hard wearing and environment resistant AA25 anodised finish… Read more »
The VEX-MAXISPOT-48 is an LED luminaire suitable for indoor and outdoor applications for architectural lighting and general lighting purposes. This VEX-MAXISPOT uses a remote LED driver to power the luminaire. Driver dimming options are available. Lumen outputs vary between 3000 and 6000 lumens depending on white drive currents. Thermistor temp control onboard. The luminaire is… Read more »
The VX04-12 RGBA colour change luminaire uses 12 LEDs to provide pre mixed RGB+Amber effects and is controlled via a remote DMX driver. The VX04-4 module is ideal for lighting architectural detail applications such as cove or cornice lighting. The module comes with a built in heat sink with 2 fixing hole points for ease… Read more »
The VX04-12 RGB colour change modules use 12 tri-chip RGB LEDs to provide pre mixed RGB effects and are controlled via a remote DMX driver. The VX04-4 module is ideal for lighting architectural detail applications such as cove or cornice lighting .The module comes with a built in heat sink with 2 fixing hole points… Read more »
The VX04-3 TIR is an optic version of the VX04 range. Offered in single colour the LED module utilises 3 high power LEDs with a choice of TIR optics for beam angles ranging from Narrow to Wall Wash. The VX04-3 module is ideal for lighting architectural applications and allows flexible wall washing. The module comes… Read more »
The VX04-3 single colour LED module utilises 3 high power planar LEDs. The VX04-3 module is ideal for lighting architectural detail applications such as cove or cornice lighting. The module comes with a built in heat sink with 2 fixing hole points for ease of fixing onto a surface. Up to 12 modules can be… Read more »
This architectural LED luminaire is ideal for high power wall grazing, facade lighting and other high power architectural lighting applications. This luminaire incorporates the latest high power LED technology utilising 180 high power LEDs along with patented LED lenses. The luminaire contains DMX 512 RDM driver technology which can be addressed remotely for control and… Read more »
The VEX-SPOT-REF is an LED luminaire suitable for indoor and outdoor applications for architectural lighting and general lighting purposes with integral LED driver and fitted snoot to reduce glare. The luminaire is fitted with a single LED reflector. Lumen outputs vary between 1200 and 2400 lumens depending on drive currents. The luminaire is offered in… Read more »
The VEX-SPOT-C is an LED luminaire suitable for indoor and outdoor applications for architectural lighting and general lighting purposes with integrated lighting cowl to reduce glare. This VEX-SPOT-C uses a remote LED driver to power the luminaire. Driver dimming options are available. Lumen outputs vary between 1200 and 2350 lumens depending on white drive currents…. Read more »
Vexica are proud to announce that we have become a member of “Made In Britain” The Made in Britain mark is accredited to businesses that sell goods that are manufactured or have undergone a final substantial change in Britain before sale. All companies that apply to use the Made in Britain mark may be asked to submit… Read more »
Welcome to Vexica’s new developments 2019 brochure. You can view this online and download a copy. This document includes an introduction to the company and a series of new product launches for 2019. If you wish to order a hard copy, please send us an email to sales@vexcia.com
Vexica are proud to announce that our entire Flexible LED range has gained UL approval. We are also working on the new Lumaera range and expect this to be listed by the end of 2019. This coincides with our new website configuration tool that has a dedicated section to UL listed product. Click here… Read more »
Brand new for 2019 is the Lumaera linear range of LED luminaires. This range is a unique selection of 6 custom made linear profiles that use our unique patent-pending optical potting technology.Three products are low profile with side exit cables and three of them are in an H format shape to allow for rear cable… Read more »
The VEX-SPOT is an LED luminaire suitable for indoor and outdoor applications for architectural and general lighting purposes. This VEX-SPOT uses a remote LED driver to power the luminaire. Driver dimming options are available. Lumen outputs vary between 1200 and 2350 lumens depending on white drive currents. Luminaire circuits are fitted with onboard temperature sensing…. Read more »
